N9918AU/112 QuickCal enables hassle-free calibration in the field for network analysis with no mechanical standards required.

It is ideal for a quick and simple calibration of the measurement when using a jumper cable or adapter to connect the DUT to the FieldFox test ports. QuickCal corrects for phase shift, time delay, and loss of adapters or jumper cables.

QuickCal does not require a specific Cal Kit and is a very simple calibration. If the highest accuracy is required, a mechanical calibration with a high quality calibration kit is recommended. QuickCal is designed and most accurate when calibrating for DUTs fitted with Type-N and 7/16 connectors. If the DUT has 3.5 mm-female or SMA-female connectors, QuickCal is NOT recommended.

Important Notes:

• 7/16 connectors can be used with QuickCal ONLY up to 6 GHz.
• Type-N 75 Ohm can be used with QuickCal ONLY up to 3 GHz.
• QuickCal cannot be used with waveguides, or if the test fixture or test setup (before DUT) includes an attenuator.

*QuickCal does not apply to N995x/6xA models.