Fixmaster Steel Liquid is a two-part steel-filled pourable epoxy repair material. It has high compressive strength and can be machined, drilled, tapped, or filed just like steel. Applications include casting metal parts and pouring molds, parts, and fixtures. This product is typically used in applications with an operating range of -30 deg C to 110 deg C (-20 deg F to 225 deg F).

Features:

• Castable liquid-repairs hard to reach areas
• Rebuilds worn parts fast-limits downtime
• High steel content-cures to a metal-like finish
• Superior adhesion-bonds well to all metal substrates
  

• Brand: Fixmaster®
• Product Type: Epoxy Adhesive
• Hardness: 84Shore D
• Material Compatibility: Steel, Metal
• Color: Part A:Gray Part B:Blue
• Primary Color: Part A:Gray Part B:Blue
• Mix Ratio: 9.5:1
• Physical Form: Part A:Paste Part B:Liquid
• Cure Time: 6h
• Viscosity Measurement: Part A:70000 to 85000 Part B:250 to 350mPa/s
• Chemical Composition: Part A:Diiron Trioxide, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether, Manganese, Gamma-Glycidoxypropyl Trimethoxysilane Part B:Triethylenetetramine, Amine Adduct, Substituted Piperazine, Nonylphenol, Amine Reacted Fatty Acid, Aliphatic Amine, Diethylene
• Specific Gravity: Part A:2.35 Part B:0.99
• VOCs Content: <10g/L
• Odor: Part A:Mild Part B:Ammoniacal
• Cure Type: Room 25°C
• Elongation at Break: 0.61%
• Gel Time: 30 to 40min
• Tensile Strength‎: 4530psi
• Maximum Operating Temperature: +225°F
• Minimum Operating Temperature: -20°F
• Container Capacity: 4lb
• Applications: Bonding, Forming Molds
• Package Quantity: 1CA