• Corrects under- and overvoltages from 83V to 147V
• 6 NEMA 5-15R outlets—2 switchable via network interface
• Network power management and control capability
• High 99% efficiency rating saves energy
• Requires WEBCARDLX network interface running firmware update 15.5.2 or later to use Auto Probe

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise.
Protects Mission-Critical Rack-Mounted Equipment
■ Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
■ Audible alarm signals loss of utility power, overload and low battery
■ 6 NEMA 5-15R outlets
■ 10 t. (3.1 m) power cord with 120V NEMA 5-15P input
■ 450-joule surge suppression rating Reliable Battery Backup
■ Supports half load up to 14 min. and full load up to 4 min.
■ Internal batteries designed for hot-swap field replacement Switchable Outlets
■ 2 load banks, each with one outlet individually controllable via software interface to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR)
■ Maintains 120V nominal output over input range of 83V-147V without using battery power EMI/RFI Line Noise Filtering
■ Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance High Efficiency Operation
■ 99% line mode efficiency saves money, energy and protects the environment LED Indicators
■ Front-panel LEDs signal power, voltage correction, load level and battery charge state Network Management Cards
■ Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD Communications Ports
■ USB and DB9 ports combine with PowerAlert software (available via free download from www.tripplite.com/poweralert) to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
■ EPO port supports emergency shutdown in large facilities Versatile Installation Options
■ Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
■ Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
■ Compatible with vertical mount cabinets