JensenTools
SCS
SCS

SCS 770758 Dual Combination Tester

Our Part #10020044

Condition:New

Mfr Part #770758

SCS 770758
SCS
SCS

SCS 770758 Dual Combination Tester

Our Part #10020044

Condition:New

Mfr Part #770758

$1,073.80EACH
Qty:Price:Savings
1$1,073.80
2$1,020.11Save 5%
3$998.63Save 7%
5$987.90Save 8%
  • Tests Operator's Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms¹: Determines that operator's personnel grounding devices (wrist straps², foot grounders, ESD shoes, smocks³) are functioning correctly.
  • Compatible with Single-Wire and Dual-Wire Wrist Straps
  • Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds: Reduces time spent testing personal grounding devices used in ESD Control Plans
  • Solid-State Test Switch with No Moving Parts: Maintains accuracy of tests and extends the lifetime of the tester
  • Split Foot Plate for Testing Foot Grounders (or ESD Shoes): Tests both foot grounders independently at the same time
  • 30 Volt Test Signal: Provides accurate tests that are not humidity dependent
  • Relay for Use with Automatic Doors or Other Locking Systems: Controls access to ESD Protected Areas
  • Optional Stand: Use the SCS stand as an alternate installation method for the Dual Combination Tester
  • Calibration Verification: Use the SCS Limit Comparator to check the test limits of the Dual Combination Tester without removing it from the workplace
  • NIST Calibrated with Certificated Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products
  • 100-240VAC Power Adapter with Interchangeable Plugs: Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe

Default test limits listed. Additional test settings are noted in the user guide.
The Dual Combination Tester can verify both single-wire and dual-wire wrist straps.
The Dual Combination Tester will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 10⁷ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.

BrandSCS
IncludesDual Combination Tester, Dual Foot Plate, Power Adapter, 6' Foot Plate Cord, Ground Cord, Cert of Calibration
$1,073.80EACH
Qty:Price:Savings
1$1,073.80
2$1,020.11Save 5%
3$998.63Save 7%
5$987.90Save 8%