JensenTools
TekBox
TekBox

TekBox TBL0110-2 Line Impedance Stabilisation Network (LISN), 1 µH, 10 A, Two Path, TBL Series

Our Part #20004253

Condition:New

Mfr Part #TBL0110-2

TekBox TBL0110-2
TekBox
TekBox

TekBox TBL0110-2 Line Impedance Stabilisation Network (LISN), 1 µH, 10 A, Two Path, TBL Series

Our Part #20004253

Condition:New

Mfr Part #TBL0110-2

$890.00EACH

1uH 10 A Line Impedance Stabilisation Network LISN

  • LISN type: V-AMN, 50Ω // 1 µH
  • Based on the standard ECSS-E-ST-20-07C Rev 1
  • Characterized frequency range: 30Hz to 500MHz
  • DC resistance: 120mΩ
  • Maximum current: 10A continuous
  • Operating voltage range: 0 to 60V DC
  • EUT/Source terminals: 4mm banana sockets
  • Designed for use in EMC measurements of small satellites and spacecraft

The TekBox TBL0110-2 LISN is a two path 50 Ω // 1 µH Line Impedance Stabilization Network (LISN) characterized from 30Hz – 500 MHz. It is based on the standard ECSS-E-ST-20-07C Rev 1. which provides the general schematic of the LISN and allows for some flexibility in component values.

The TBL0110-2 implementation aims for use in EMC measurements of small satellites and spacecraft. The LISN does not have an output for conducted emission measurements; instead, it functions as a network for line impedance stabilization. An RF current monitoring probe (sold separately) is used to measure conducted emissions, according to the standard.

The 1µH inductor mimics the typical inductance of the supply wire harness in small spacecraft or satellites.

The LISN is inserted into the power line and power return line of the EUT.

In The Box

  • 1µH/10A Two path LISN

BrandTekBox
Frequency Range30Hz to 500MHz
SeriesTBL Series
TypeLISN
$890.00EACH