Four Channel Rework System with 4 Tools (Shop Air Not Required)

The JBC DMSD-1QA is a four channel rework system. The DMSD-1QA includes the T245-A general-purpose iron (tips sold separately), DT530-A angled desoldering iron (with D530003 nozzle, 1mm), as well as the MSE-B electric desoldering module.

Please note: This system has an electric pump, the DMSD-1QA does NOT require an external source of compressed air.

Features and Benefits:

• Four channel rework system

• Soldering and vacuum functionality

• Includes DME four tool control unit

• Includes T245 general purpose iron (tips sold separately)

• Includes DT530 desoldering iron (includes D530003 nozzle)

• Includes MSE-B electric desoldering module

• Desoldering module does NOT require external source of compressed air

• Compatible with a wide variety of tools and peripherals

JBC DMSD-1QA

DME 4-Tool Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC Tools, delivering up to 150 W per tool.

MSE Electric Desoldering Module is ideal for a complete desoldering process. Delivering unmatched suction power and achieving an 85% vacuum.

DT530 Angled Desoldering Iron is ideal for removing through-hole components and excess solder during SMD rework.

T245 General Purpose Handle is perfect for both SMDs and jobs with high-power requirements (e.g. ground plane soldering).

C245 Cartridge Range is suitable for general soldering purposes and they are perfect for both SMD components or for applications with high power requirements such as ground plane soldering.

D530 Tip Range offer long life and instant heat up. Excellent heat transfer and great durability for the DT530.

JBC's wide range of Tools feature soldering and rework irons that guarantee maximum efficiency. The short distance tip-to-grip allows you more control and the highest precision.

Intelligent Heat System

Delivers the highest rework quality, powered by JBC's Most Efficient Soldering System and advanced Intelligent Heat Management, which optimizes heat control to extend tip life and minimize energy consumption.

Sleep and Hibernation Modes

Sleep Mode automatically lowers the tip temperature below the solder melting point when the tool rests in the stand. It prevents the dissolution of the iron tip coating into molten solder.

After a configurable period of tool inactivity in the stand, the tool enters Hibernation Mode. It cuts off the power supply, making the tip reach room temperature, thus preventing oxidation and saving energy.

Longer Tip Life

Tip life increases exponentially by using lower temperatures as shown. Using Sleep Mode, the temperature is further reduced, which multiplies tip life by 5.

DME Station Tool Compatibility

The DME control station is compatible with several additional tools, covering a wide variety of soldering and rework applications.

The chart below provides an overview of each tool, along with a compatible stand and tip series.

JBC DMSD-1QA Product Details:

• Peak power: 150 W per tool

• Selectable temperature: 90 to 450 ºC / 190 to 840 ºF

• Idle temp. stability (still air): ±1.5ºC / ±3ºF
  Meets and exceed IPC J-STD-001F

• Temperature accuracy: ±3% using reference cartridge

• Temp. adjustment: ±50ºC / ±90ºF Through station settings menu

• Vacuum: 85 % / 640 mmHg / 25.4 inHg

• Flow rate: 35 SLPM

• Tip-to-ground resistance: <2 ohms

• Tip-to-ground voltage: <2 mV RMS