Nordbak Pneu-Wear is a small ceramic bead filled two-part epoxy putty, designed to protect equipment from fine particle abrasion in wet and dry service. Typical applications include providing a protective lining in pneumatic conveyor systems and repairing and providing abrasion resistance in elbows, slurry pumps, hoppers, cyclones, and dust collectors under service temperatures of -30 to 120 deg C (-20 to 250 deg F).

Features:

• Small ceramic bead filled-resists fine particle abrasion
• Prolongs equipment life
• Easy to mix and use
• Renews worn surfaces fast-reduces downtime
• Non sag-provides abrasion resistance on over-head and vertical surfaces
  

• Brand: Nordbak® Pneu-Wear™
• Product Type: Epoxy Adhesive
• Hardness: 86Shore D
• Material Compatibility: Metal
• Color: Part A:Dark Gray Part B:Tan
• Primary Color: Part A:Dark Gray Part B:Brown
• Mix Ratio: 4:1
• Physical Form: Part A:Liquid Part B:Paste
• Cure Time: 6h
• Chemical Composition: Part A:Aluminum Oxide,Fibrous, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane Part B:Aluminum Oxide,Fibrous, Silicon Carbide, Diethylenetriamine
• Specific Gravity: Part B:1.53
• VOCs Content: <10g/L
• Odor: Part A:Epoxy Part B:Ammoniacal
• Cure Type: Room 25°C
• Elongation at Break: 0.3%
• Gel Time: 35 to 55min
• Tensile Strength‎: 2550psi
• Container Capacity: 25lb
• Applications: Abrasion Resistance, Pneumatic Conveyor Systems and Repairing and Providing Abrasion Resistance in Elbows, Slurry Pumps, Hoppers, Cyclones and Dust Collectors