JensenTools
Techspray
Techspray

Techspray 2127-54G Conformal Coating, Fine-L-Kote SRV, Silicone, 54 Gallon, Standard Viscosity

Our Part #10163322

Condition:New

Mfr Part #2127-54G

Techspray 2127-54G
Techspray
Techspray

Techspray 2127-54G Conformal Coating, Fine-L-Kote SRV, Silicone, 54 Gallon, Standard Viscosity

Our Part #10163322

Condition:New

Mfr Part #2127-54G

Hazardous
CallEACH
Hazardous
  • Low VOC
  • Low toxicity - HAPs free
  • Exceptional surface finish – high gloss, superior transparency
  • Moisture resistant
  • Corrosion resistant
  • Vibration resistant & flexible
  • Thermal resistance - 392-degree F (200-degree C)
  • Dielectric strength - 720 volts/mil
  • RoHS Compliant
  • Meets IPC-CC-830B
  • Passes the laboratory tests of MIL-I-46058C. However, it is not qualified on QPL-46058
  • UL94 flammability rating V-0
  • MIL-STD 810G salt spray test
  • MS941-04 salt spray test

A great replacement for Dow conformal coating 1-2577 & 1-2620. Low VOC coating - Ideal for moisture, thermal, corrosion and vibration protection.

Fine-L-Kote SRV is a high gloss, ultra-clear conformal coating that is moisture and abrasion resistant. This coating offers resilient, mechanical stress-reducing PCB protection, and is low VOC. It extends component life by protecting against adverse environments, with resistance to moisture, salt, fungus, and corrosive vapors. Because of its exceptional dirt, dust, and soil repellency, the coated surfaces remain clean longer.

Fine-L-Kote SRV cures quickly at ambient conditions or heat acceleration can speed in-line processing. Ready-to-use viscosities are available: standard (SRV) for manual and selective spray systems, and high viscosity (SRV 950) for dipping processes.

Silicone conformal coating provides excellent protection in a very wide temperature range. SR provides good chemical resistance, moisture and salt spray resistance, and is very flexible. Silicone conformal coating isn’t abrasion resistant because of its rubbery nature, but that property does make it resilient against vibrational stresses. Silicone coatings are commonly used in high humidity environments, like outdoor signage.


BrandTechspray
ColorClear
Container TypeDrum
MaterialSilicone
TypeInsoluble in Water
Container Volume54 gal.
VOCs(SCAQMD) 425 g/L
FlammableYes
Physical StateOne-Part Liquid
Cure Time24 hrs.
Flash Point10°F
Operating Temperature Range-76 - 392°F
Dielectric StrengthGreater than 28 kV
SpecificationsMeets IPC-CC-830B, Passes the laboratory tests of MIL-I-46058C. However, it is not qualified on QPL-46058., UL94 flammability rating V-0, MIL-STD 810G salt spray test, MS941-04 salt spray test
Viscosity Range82 +/-20 cps
CallEACH