Desco 19651 Multi-Mount Continuous Monitor with North American Power Adapter

Continuously Monitors Path-to-Ground Integrity of One Operator and One ESD Worksurface
Manufacturer Model Number: 19651
Part Number: 548ST9651
Former Part Number: 487-280
Shipping Weight: 1.00 pound
Your Price: $160.72
Availability: Currently 31 in stock. Ships same day if ordered by 5 p.m. Eastern Time.
Product Features
  • Wave distortion technology
  • Alarm alerts operator when disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent
  • Mat monitor switch disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
  • Audible alarm adjustment sets the buzzer’s volume from loud to louder
  • Park snap allows operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
  • Single-wire impedance design meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 volt operator test voltage reduces the risk of electrical overstress (EOS)
  • <50 millisecond alarm response time identifies failures and intermittencies that inferior technologies miss
  • NIST calibrated with certificate included
  • 100-240VAC power adapter with north american plug
Product Description
Wave distortion technology provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor. Features continuous visual and audible alarms illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs. A remote alarm accessory model 19653 connect to the multi-mount monitor and place in the operator’s field of view to alert operator of alarms. For calibration verification with Desco 98220 (Part No. 175-406) to check the test limits of Wave Distortion Monitors without removing them from their workstations.
AccessoriesSpecificationsKit ContentsReplacement Parts